The belt conveyor in the conveyor is one of the common types, so it is necessary to understand and understand it, so let's start below.
1. In the belt conveyor, what determines the size of its conveying capacity? If the mobile drive device vibrates too much, then what is the reason?
In a belt conveyor, the size of its conveying capacity is determined by the specifications of the conveyor. Specifically, it is the conveyor speed and the width of the conveyor belt. In addition, if the conveyor's mobile drive device vibrates greatly, the main reason is that the place where the motor is fixed on the equipment is too thin to use the plate, which does not play a good fixed role.
2. What specific work does the belt conveyor have when it decelerates and stops normally?
If the belt conveyor is normally decelerated and stopped, then its specific work is:
after the conveyor belt finishes conveying the goods, turn off the power supply, so that the conveyor starts to slow down and stop. The backstop is mainly used to prevent problems such as reverse operation of items. Therefore, I hope everyone can have a clear understanding of this point, and operate correctly and standardly, so as to ensure the smooth progress of its work.
3. How to judge the material of the conveyor belt in the belt conveyor?
If the material of the belt conveyor belt is judged, it is mainly to look at the specification label of the conveyor belt. If it is CC, it is cotton canvas, NN is nylon, and EP is polyester. If there is no label, it depends on the material of the wire layer. However, this requires a certain amount of experience, otherwise, there is no guarantee of accurate judgment.