The conveying capacity and conveying range of the scraper conveyor have a great relationship with the form of its scraper. The equipment can be equipped with different scrapers. Of course, the corresponding conditions for each type of scraper are also different. What types of scraper types do we often use?

One of the scraper forms of the scraper conveyor is the T-shaped scraper, which is actually a long and narrow rectangular steel plate or angle steel with a thickness of 5-10mm. T-shaped scraper is a relatively simple scraper, used in horizontal buried scraper conveyors with a small slot width.

There are also U-shaped scrapers bent from round steel with φ20-25 or square steel with 18×18-24×24. Obviously, its conveying capacity is much stronger than T-shaped, so most of it will be used in machine grooves. The horizontal buried scraper conveyor with large width is used for conveying various materials.

The other is a V-shaped scraper, a conveyor scraper that is bent from round steel with φ14-22 or square steel with 14×14-20×20. The V-shape is also a relatively simple scraper. In various buried scraper conveyors with vertical lifting, it can be arranged outwardly or arranged inwardly.

In addition, there are O-shaped scrapers and L-shaped scrapers. The former is made of round steel with φ14-22 or square steel with 14×14-20×20. It is a closed scraper, so The rigidity and strength are very good. It is used in various vertical lifting buried scraper conveyors with large slot widths. It can only be arranged outwards during operation.

The latter is usually made by bending 14×14-20×20 square steel. Like the O-shaped scraper, it does not appear in pairs, but is welded individually to the chain rod. It is only used for MP Type buried scraper conveyor is used to transport materials.